How to Automate Your Garage Doors

By: Garage Doors

There are hundreds of garage door openers to choose from but before you can do that there are two key considerations concerning your garage door itself.

Before deciding on an electric garage door opener check that an able bodied person can effortlessly open the garage door manually as a motor will not do what they can’t.  If the door works smoothly and effortlessly, then adding an electric operator should be straight forward.

You will also need to check that your door balances at around chest height to ensure you have the correct spring tension for the operator to lift the door.  If the springs are broken or the door is not balanced properly the electric operator will not work effectively.  You may need to service the door by lubricating the moving parts or replace the door springs and other moving parts.

The other consideration is to know what type of garage door you have.  This is because it is essential for you to choose the correct device to suit your door mechanism to ensure the safe and smooth operation of your garage door.

There are four main types of garage door mechanism: retractable door, canopy door, side hinged door, and sectional door.

Up & Over – Retractable Garage Doors (Tracked)

These are identified by a single door panel with springs either side or horizontal ceiling tracks which support the door in the open position.  When the garage door is fully open, the bottom edge of the door is flush with the garage door frame

If you have a retractable up and over garage door then you are in luck, as these are ideal for automation and you can safely use any type of operator.  Your main considerations must be the noise (AC or DC motor) and the material, width and weight of the door to ensure you choose an operator powerful enough to lift the door.

Up & Over – Canopy Doors (Trackless)

This door type is not recommended for safe automation although there are options available; I would never recommend or safety and reliability.  If you don’t want to replace the entire door and mechanism you can purchase a retractable door mechanism and replace the canopy door gear.

An up & over canopy door is identified by the large spring which runs over the head of the door and when the door is open the garage door panel protrudes by approximately 600mm from the opening.

Side Hinged Doors

These garage doors can be automated using a conversion kit with most operators.  You will need to check the operator can be use for side hinged doors so that the auto-reverse safety feature functions normally.

Sectional doors

Sectional Garage Doors are identified by hinged panels that allow the door to rise vertically without swinging out as the door opens.

They are perfect garage doors for automation as no additional parts are required and you can use any type of AC or DC operator.  To ensure the operator will fit it’s a good idea to check the clearance above the door during its opening cycle then check the minimum clearance requirement for the operator as they vary.

Again your choose an operator powerful enough to lift the door.

About the Author

A garage door can make up to 25% of the frontage of your house, so making sure you have a garage door to complement your home is important in maximizing its value and appeal. Do not forget to visit -http://www.garagedoorsuperstore.co.uk

Article Source: http://www.articlesbase.com/ – How to Automate Your Garage Doors

The steel door is by far the most popular and utilized across the country. It proves to be an economical and efficient door. Steel rusts when exposed to salty, damp air and wood easily warps and rots when confronted with ocean breezes, waves, or sand erosion. Fiberglass is very handy in such places, and one usually doesn’t have to worry about the risk of freezing with such a large body of water nearby. These high pressure spray guns are provided with sharp stainless steel nozzle and needle. This enables the spray guns to be used with water borne and solvent based products.

Warranties for steel doors start at 10 years; limited lifetime coverage is not uncommon. Once the mainstay garage door material, wood has taken a backseat to other materials in the middle of the market. Other than durability, steel actually has qualities that will rival other materials. Despite the obvious benefits of steel, wood still remains a popular choice for garage doors.

For that reason wooden to your garage, security and safety are not as durable as steel and requires more in keeping with the idea of using radial ball bearings are installed to make it easier to lift. It does have steel braces every 4 feet and an angle iron front piece, but that is a 2 foot deep shelf. If you used smaller braces spaced closer together, and a typical 12 inch shelf, I would think either product would work. When you are looking for the ultimate in bang for your buck garage doors, you can’t go wrong with steel. It currently sits as the number one material used as 80 percent of the market uses it.

Fully bonded steel stiffeners at the rear of all ABS doors reinforce the panel and help protect against forced entry. If you are looking for a garage door that will stand the knocks and bumps of family life you need look no further than ABS. This oil residue has no rust-inhibitive benefits, therefore oil tempering springs, as any unprotected steel product, will rust rather quickly, presenting yet another challenge to the hard-working door installer carrying springs in his service truck.

Plastisol specifically is used extensively as an exterior weather resistant material on far larger steel surface areas than those we build Steel-line doors to. A choice of 10 standard plastisol coated fully finished colors are available to choose from as standard and 2 further weather grain options in Golden Oak and Rosewood are available for a small surcharge.These pieces are applied to sections made of steel or cellular PVC. These doors are lighter in weight, they are moisture-resistant and more economical, and they hold paint better than wood.